DSLRKIT ALL Gigabit 5 Ports 4 PoE+ Switch 802.3at Power Over Ethernet NO PSU

Description

DSLRKIT PSE4P1UGK
Gigabit
PoE+ Switch
5 Ports (1Uplink, 4 PoE)
10/100/1000Mbps
IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-)
Auto Detection Powered Device
Input DC
4
8
V~57
V power supply
(Power supply not included)
Wall Mount
It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 4 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively.
Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Features:
Supports Virtual LAN(VLAN) ON/OFF
(
When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.)
Up to 30w/port of Power on
Complies to IEEE 802.3af/802.3at PoE standard
Compatible with All IEEE 802.3af/802.3at
Safe: Low power Devices Receive Only the Power They Need
Safe and Reliable Power to WLAN Access Points
Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port
Supports 10/100/1000 Base-T
Compact Design Fits Easily in WLAN Access
Plug-and-Play no configuration required
Each port supports auto MDI/MDIX
Specification:
ALL LAN/WAN Port:
Standard 1000Mbps Ethernet port.  can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5e/6 cable
。
LAN Port 1-4:
any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs)
Virtual LAN
:
ON/OFF
LED
Power (Red)
PoE In-Use and
1000 LNK / ACT
(Orange LAN Port)
10/100 LNK / ACT(Green)
Product Dimensions
132mm
W x 66
mm D x 32mm
H
Weight
270g(only switch)
Power Requirement
5.5x2.1 Jack Input Voltage 48~57V DC
PoE Standard
IEEE 802.3af, IEEE802.3at
PoE Power Output
48V-57VDC, Max. 30Watt/port
PoE Power Supply Type
pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan
Regulation Compliance
FCC Part 15 Class A, CE
Operating
Temperature: 0~50 Degree C, Relative Humidity: 20~95%
Storage
Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing)
Standards Compliance
IEEE 802.3: 10Base-T
IEEE 802.3u: 100Base-Tx
IEEE 802.3z: 1000Base-Tx
IEEE 802.3x: Flow Control
Item Included:
DSLRKIT PSE4P1UGK PoE switch x1(with Retail Box)
(Power supply not included)
12 Months Warranty from the date of purchase.